M20*57 excavator track shoe bolts and nuts are fastening components used to attach track shoes, also called track pads, to the track chain. In this designation, M20 indicates a metric thread with a nominal diameter of 20 mm, while 57 mm generally refers to the bolt length; the exact length-measurement convention should be confirmed with the supplier or drawing. These dimensions alone do not guarantee fitment: thread pitch, head style, material or strength requirements, nut type, and the track-chain design must also match. Before ordering, compare the existing hardware or machine documentation and confirm the complete specification as a set.
This guide is for equipment parts distributors, maintenance teams, repair workshops, and procurement professionals sourcing excavator track shoe fasteners. It is especially useful when a buyer has an M20*57 description but needs to verify whether that description is sufficient for a repeat order or replacement. It is not a substitute for the excavator manufacturer’s parts information or a machine-specific engineering review. Use the details below as a practical purchasing checklist, then confirm them against the actual application.
A track shoe bolt passes through the track shoe and the corresponding track-chain connection, where a compatible nut secures the assembly. Together, the fasteners help keep the shoe attached as the undercarriage moves and operates. Their fit depends on more than the bolt’s nominal diameter and length: the head must seat correctly, the thread must engage with the nut, and the assembled hardware must suit the chain and shoe geometry. A mismatch can prevent proper assembly or make the connection unsuitable for service.
In metric fastener terminology, M20 denotes a nominal thread diameter of 20 mm. The “57” commonly describes a 57 mm bolt length, but buyers should confirm the measurement reference, such as whether length is taken from beneath the head. Head shape and profile also affect how a bolt sits in a track shoe, so an overall length match by itself is not enough to establish interchangeability.
Thread pitch is another essential detail. A common coarse metric pitch for M20 is 2.5 mm, but this should be treated as a reference rather than an assumed specification for every replacement requirement. Confirm the pitch from the machine documentation, a reliable sample, or supplier measurement before ordering. The bolt and nut must have matching thread dimensions and compatible tolerances.
Track shoe fasteners may be offered in different material and strength configurations, depending on the application and supplier’s product range. Do not assume a grade, heat-treatment condition, coating, or corrosion protection from the M20*57 designation alone. Where the original specification identifies a property class or other requirement, provide it to the supplier and request confirmation that the offered product matches. The nut should also be specified as part of the assembly rather than selected as a generic M20 item.
Head style, bearing surface, and nut shape can vary between designs. These details influence seating and clearance around the shoe and chain, so compare them with the original part or technical drawing. If the application uses a particular washer or locking arrangement, include it in the inquiry instead of assuming it is included with the bolt and nut set.
Zhonghai Jiuchuan supply professional and honest service.
The safest selection process starts with the machine and undercarriage information, then checks the physical fastener details. If the original part number is available, use it as a reference and ask the supplier to verify the match rather than relying on a general description. If no part number is available, share measurements and images of both the fastener and its installation position. A sample can help clarify dimensions, but it should be checked for wear or deformation before being used as the sole specification source.
| What to verify | Why it matters | Useful information to provide |
|---|---|---|
| Diameter, length, and length reference | Prevents ordering a bolt that does not suit the joint geometry | Drawing, part number, or measurements from an appropriate sample |
| Thread pitch and nut match | Ensures the paired components can engage correctly | Specified pitch or a verified original fastener set |
| Head, seating, and nut configuration | Supports proper fit against the shoe and available clearance | Images, drawing details, and any washer or locking requirements |
| Material or strength requirement | Aligns the replacement with the application’s stated requirements | Original specification or machine-manufacturer documentation |
Pricing for M20*57 track shoe bolts and nuts depends on the confirmed specification, order quantity, packaging, and the supplier’s current availability. Minimum order quantity and lead time can also vary by product configuration and production or stock status. A price comparison is meaningful only when the quotations cover the same bolt dimensions, thread details, nut type, material or strength requirements, and included components. Request these points in writing so purchasing teams can compare offers on an equivalent basis.
A suitable supplier should be able to discuss the information needed to verify fitment and clearly identify what is included in the quoted set. Ask whether the quotation is based on your drawing, part number, or supplied sample, and request confirmation of any details that remain uncertain. You can also ask about inspection or documentation available for the order, without assuming that a particular certificate or test report is included. Clear answers before purchase help reduce avoidable specification misunderstandings.
At Zhonghai Jiuchuan, we can review the specification details you provide and clarify which information is needed to assess an M20*57 track shoe bolt and nut inquiry. Sending a drawing, part reference, or well-lit photographs alongside your dimensions can make the discussion more precise. We can then confirm the quoted configuration, availability, order conditions, and estimated lead time for your requirements. Final fitment should still be checked against the equipment documentation or the buyer’s approved engineering specification.
M20*57 identifies a useful starting point for sourcing excavator track shoe bolts and nuts: a nominal 20 mm metric thread and a stated 57 mm length. It is not, on its own, proof that a fastener will fit a particular track shoe or chain. Confirm the length reference, thread pitch, head and nut configuration, and any material or strength requirements before purchase, and use the equipment documentation or a verified sample to support that check.
Your next step is to prepare the machine or part reference, measurements, and quantity, then request a written specification and availability confirmation from your supplier. Zhonghai Jiuchuan welcomes B2B inquiries for M20*57 excavator track shoe bolts and nuts and can review the details provided to support a clearer sourcing decision.
For more information, please visit M20*57 Excavator Track Shoe Bolts and Nuts.